| 规格级别 | 其它 其它 注塑 | 外观颜色 | |
| 该料用途 | |||
| 备注说明 | |||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
|
物理性能 |
比重 | ASTM D792 | 1.20 | g/cm3 | |
| 熔体流动速率 | 300℃/1.2kg | ASTM D1238 | 10 | g/10min | |
| 成型收缩率 | 流动 | ASTM D955 | 0.50-0.70 | % | |
| 硬度 | 洛氏硬度 | R计秤,3.18mm | ASTM D785 | 118 | |
|
机械性能 |
拉伸模量 | 3.18mm | ASTM D638 | 2410 | MPa |
| 拉伸强度 |
屈服,3.18mm | ASTM D638 | 60.0 | MPa | |
| 断裂,3.18mm | ASTM D638 | 71.0 | MPa | ||
| 伸长率 | 断裂,3.18mm | ASTM D638 | 150 | % | |
| 弯曲模量 | 3.18mm | ASTM D790 | 2410 | MPa | |
| 弯曲强度 | 3.18mm | ASTM D790 | 96.5 | MPa | |
| 悬壁梁缺口冲击强度 | 23℃,3.18mm | ASTM D256 | 907 | J/m | |
| 无缺口悬壁梁冲击 | 23℃,3.18mm | ASTM D256 | 无断裂 | ||
| 装有测量仪表的落镖冲击 | 23℃,3.18mm | ASTM D3763 | 87.0 | J | |
|
热性能 |
热变形温度 |
0.45MPa,退火,3.99mm | ASTM D648 | 144 | ℃ |
| 1.8MPa,未退火,3.99mm | ASTM D648 | 128 | ℃ | ||
| 1.8MPa,退火,3.99mm | ASTM D648 | 141 | ℃ | ||
| 维卡软化温度 | ASTM D1525 | 149 | ℃ | ||
| 线形膨胀系数 | 流动(-40到80℃) | ASTM D696 | 0.000068 | cm/cm/℃ | |
|
电气性能 |
体积电阻率 | ASTM D257 | 2.0E+17 | ohm·cm | |
| 介电强度 | ASTM D149 | 17 | KV/mm | ||
| 介电常数 |
60Hz | ASTM D150 | 3.00 | ||
| 1MHz | ASTM D150 | 3.00 | |||
| 耗散因数 |
60Hz | ASTM D150 | 0.0010 | ||
| 1MHz | ASTM D150 | 0.0020 | |||
|
可燃性 |
UL阻燃等级 |
1.59mm | UL94 | HB | |
| 3.18mm | UL94 | HB | |||
| 极限氧指数 | ASTM D2863 | 26 | % | ||
