| 规格级别 | 外观颜色 | ||
| 该料用途 | |||
| 备注说明 | |||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 比重 | ASTMD792 | 0.943 | g/cm³ | |
| 物理性能 | 密度 | ISO1183 | 0.943 | g/cm³ | |
| ELASTOMERS | 弹性体 | TestMethod | NominalValue | Unit | |
| ELASTOMERS | 拉伸应力-横向流量(100%应变) | ASTMD412 | 4.50 | MPa | |
| ELASTOMERS | 拉伸应力-横向流量(100%应变) | ISO37 | 4.50 | MPa | |
| ELASTOMERS | TensileStrength-AcrossFlow(Break) | ASTMD412 | 8.60 | MPa | |
| ELASTOMERS | 拉伸应力-横向流量(断裂) | ISO37 | 8.60 | MPa | |
| ELASTOMERS | 伸长率-横向流量(断裂) | ASTMD412 | 650 | % | |
| ELASTOMERS | 伸长率-横向流量(断裂) | ISO37 | 650 | % | |
| ELASTOMERS | 压缩永久变形(70°C,22hr) | ASTMD395 | 60 | % | |
| ELASTOMERS | 压缩永久变形(70°C,22hr) | ISO815 | 60 | % | |
| 硬度 | DurometerHardness(ShoreA,5sec,InjectionMolded) | ASTMD2240 | 86 | ||
| 硬度 | 肖氏硬度(邵氏A,5秒,注塑) | ISO868 | 86 | ||
| ADDITIONAL INFORMATION | 补充信息 | TestMethod | NominalValue | Unit | |
| ADDITIONAL INFORMATION | [email protected]/s | 200°C | ISO11443 | 227 | Pa·s |
| ADDITIONAL INFORMATION | [email protected]/s | 200°C | ASTMD3835 | 227 | Pa·s |
